Homemade Playdough

Thank you for visiting. I now have a new home at www.countrypeony.com. I hope you will find me there.

If you follow me on Instagram, @thecountrypeony, you may have noticed that my three-year-old son and I love playing in the kitchen. He is at the age where he wants to try everything, and I try to encourage his enthusiasm for learning. Since my son loves playdough I thought it would be fun for him to help me make his own version. DIY Natural has a simple and easy-to-follow playdough recipe that we used.

My son and I had a great time making this playdough, but this is a very messy process (especially with an excited three-year-old). Therefore, I recommend a dose of patience added to the ingredients list.

Ingredients & Tools:

• 1 cup of flour. Plus a handful of flour to help roll out your playdough onto the countertop. 
• 1/4 cup of salt. I only used sea salt, because that is what I had on hand. 
• 1/2 cup of water
• 5 drops of food coloring
• 2 mixing bowls
• Spoon for mixing

In one bowl mix together the flour and salt. In another bowl mix together the food coloring and water.

Then slowly add the food coloring/water bowl into the flour/salt bowl, stirring while you pour. 

Once all ingredients are stirred together, knead the dough until the flour is absorbed into the wet mixture. 

Then place some flour onto the countertop and continue to knead the playdough until you get the consistency that you like. Add more flour if it is too sticky, and more water if it is too dry. 

Finally it is time to enjoy the fruits of your labor, or hopefully a moment of quiet time as your child plays. 

I stored his playdough in a ziploc bag at room temperature. It lasted about a month until I thought it was time to start over. 

Whether or not your child is able to help with this project, I hope he or she enjoys the end product. 

DIY Tulle Balls

Thank you for visiting. I now have a new home at www.countrypeony.com. I hope you will find me there.

Is March almost over? I had every intention of getting this tutorial to you sooner, but February and March kept me busy. Better late than never; below is a tutorial for the tulle balls from my daughter's swan lake inspired, fan wall birthday backdrop that I adapted from the wonderful tutorial from Heidi Hope Photography. 

But first, some housekeeping: 

• I used pipe cleaners instead of ribbon to tie the balls together. This allowed for better manipulation when I adhered the tutus to the wall. 
• I cut the tulle first so that I could easily bring it through the donut hole stencil. 
• It is important to keep your fabric taut to create a cohesive, finished tulle ball. 
• I varied the thickness of each ball to allow for different dimensions. If you want your tulle ball to be full, overlap, overlap, and overlap. 
• I marked one side of the top and bottom piece of my donut stencil so I knew what direction the pipe cleaner was going. 

For this project, you will need:

• Circular base to create the stencil for the ball. I used a large mixing bowl for the outside of the stencil and a cup for the inside of the stencil. 
• Thick paper for the stencil. I used cardboard from an old moving box. 
• Tulle
• Scissors to create the stencil and to cut the tulle.
• Marker to create the stencil guidelines.
• Pipe cleaner to keep the tulle together to form the shape of the ball. 
• Tape to adhere the pipe cleaner to the stencil as you loop the tulle through the stencil. 

As mentioned above, use your circular objects to create a nice stencil. However, no one says they have to be pretty :). 

Next, adhere the pipe cleaner to one of the stencils. 

As noted above, I added guide marks to the top and bottom stencil so I knew what side to pull the pipe cleaner through once the tulle was spun. 

I started the end of the tulle at the end of the stencil, so the length was even throughout the ball. 

Once you have enough overlapping and fullness, cut the tulle at the end of the stencil to ensure the length of the ball is even. 

Next, you will cut the tulle in between the two stencils, and then twist the pipe cleaner with the stencils still in place. Be extra careful not to move the stencils up too much when you twist the pipe cleaner so the tulle stays in place. 

Once the pipe cleaner is tight around the tulle, you can pull the tulle out of the stencils. Voila! You have a fun show stopper that you can use in many different capacities. I think this fun decoration can be used a photo backdrop, in a fan wall, garland, table centerpiece, as part of a tutu skirt, and the list goes on and on. 

I hope you have just as much fun with these whimsical decorations as I did. 

Swan Lake First Birthday Party

Thank you for visiting. I now have a new home at www.countrypeony.com. I hope you will find me there.

We celebrated my baby girl's first birthday last weekend. To say I had fun planning and executing my daughter's ballerina/Swan Lake birthday party would be an understatement. I loved it! It was such a fun theme for a little girl who loves to dance. For the playful theme I used different shades of pink with white and gold accents. I made the majority of the decorations and used items from her bedroom to add special touches and save on cost. 

I hope you enjoy the pictures below as they highlight some of the details from her first birthday. 

The venue has a beautiful lake in front of it, so I thought it would be fun to add a 6 foot swan to the lake to greet guests as they walked up. Six foot swan, why not?

My wonderful mother whipped together the above tutu garland with some tulle to greet guests as they entered the party. 

I created a fan and tutu backdrop behind the food table to add a focal point that wasn't in the way of the food. Chelsea with Two Twenty One has a great tutorial for a fan wall. 

I will feature the tutu balls in a tutorial on the blog soon. 

Aside from the good company, my favorite part of the celebration was the desserts. Rebecka with Sweet Alyse Bakery did an incredible job with the smash cake, cookies, and cupcakes. I gave her minimal direction, and she delivered a stellar product. Not only were they perfect for the theme, but they were scrumptious. You can see more of the desserts in detail below. 

A first birthday isn't complete without a monthly picture wall garland. I love watching my baby grow. I kept my son's garland up in our house for over a year. 

To add extra interest, I pulled items from my daughter's bedroom that worked with the theme like her curtains and tutus.

As an event planner this party was so fun to create, because I knew my daughter would enjoy it regardless of how everything turned out. In the end it turned out to be a wonderful celebration with our friends and family. Thank you to everyone who celebrated with us. 

Baker: Sweet Alyse Bakery

Confetti Balloons: Yugucu

Number 1 Balloon: Magnolia Bloom Btq

Ballerina Garland: Meri Meri Party Garlands

Paper Fans: Hobby Lobby

Large Inflatable Swan: Wal Mart

Linens: Borrowed from my mother-in-law

Serving Trays: Borrowed from my mother-in-law and mother

DIY Growth Chart

Thank you for visiting. I now have a new home at www.countrypeony.com. I hope you will find me there.

I grew up in the same farmhouse that my parents still live in. Its beautiful old walls have many dings and marks from wear and love over the years. The marks I remember the best are behind a dresser in my parent's closet. Every year my four siblings and I would stand next to that wall behind the dresser and my mother would make a mark on the wall to indicate our height and age. It was so fun to compare growth ticks with each sibling and ourselves each year. I wanted the same for my children, but I knew we wouldn't be in our forever home for a while. So, with my husband's help we created a DIY growth chart that we can take with us to keep forever.

For this project we followed April Wilkerson's very helpful DIY Wood Burned Growth Chart Ruler video via her youtube channel.

For this project you will need:

• Square Edge
• Painter's or Masking Tape
• Tape Measure
• Clamp
• Woodburner (we used the 1/4" flathead)
• Wood Pencil
• Numeric Stencils
• 1X12 - 6 ft long wooden board. We used pine. Look for a board that is straight, without cracks, and doesn't have knots where you will place the numbers. The drier the wood the better for application. 
• Fan 
• Mounting Hardware
• Finishing Products
• Stain (we used Minwax Wood Finish stain in Dark Walnut)
• Brush or rag to apply the stain. We used a foam brush, because we wanted a nice even application without brush marks. 
• Polyurethane
• Fine grit sandpaper

Clamp the tape measure to the end of the board. We started the board at 6 inches, because we assumed we would hang the board 6 inches above the ground due to baseboards. If you plan to place your board directly onto the ground clamp the tape measure at the beginning of the board starting at 0 inches.

Mark out every inch. Then mark out an 1/8" on either side of the inch mark to account for the width of each inch tick mark. Leaving each tick mark to be 1/4" thick. 

After you make your tick marks, take your square edge and make a line to represent the different dimensions. For reference:

• Each tick mark representing a foot is 3" long
• Each tick mark representing 1/2 foot is 2" long
• Each tick mark representing 1/4 or 3/4 foot is 1 1/2" long
• All other tick marks are 1" long

Then connect the two lines to block off the tick marks. 

Now take your stencils and center them on the tick marks representing each foot. Tape the stencil down with painter's or masking tape. Ensure that you stay consistent and aligned with how far your numbers are away from the tick marks. 

Once you have stenciled out the numbers it is time to start the wood burning process. Use the wood burner to blacken all of the tick marks and numbers. 

*Tip: we found it helpful to outline the tick marks and numbers first and then filled in to create a crisp and even line. This ensured that we didn't burn past the lines. 

Some wood, including pine, contains sap. As you burn, the sap may seep out and you will have to clean off your wood burning tip. Use a piece of scrap wood to clean the charred sap off the tip. 

It is important that you burn the wood in a well ventilated room. We also used a floor fan and overhead fan to ensure the smoke circulated.

The wood burning process takes a long time. It is important to be patient if you want a quality finished product. My husband (the more patient between the two of us) completed this project, and I couldn't be happier with it. 

From here you can decide to stain and polyurethane your growth chart to help protect it. We used Minwax Wood Finish Walnut Stain since we wanted a darker finish. Follow the recommended directions on the staining product you use. We applied one coat of stain and three coats of polyurethane. We used 120 fine grit sandpaper in between each coat of polyurethane to ensure a smooth finish. 

Apply mounting hardware and enjoy watching your little ones grow.